Nissan Pathfinder Off-Road Association: PoHo 8 - Nissan Pathfinder Off-Road Association

Jump to content

  • (303 Pages)
  • +
  • « First
  • 301
  • 302
  • 303
  • You cannot start a new topic
  • You cannot reply to this topic

PoHo 8 From the new page King...ho on folks!

#6041 User is offline   Precise1 Icon

  • "SAVE THAT BEER WOMAN"
  • PipPipPipPipPip
  • Group: Moderator
  • Posts: 18,394
  • Joined: 02-September 04
  • Location:Santa Rosa, Ca
  • Model:XE
  • Year:1995

Posted Yesterday, 09:11 PM

View PostGrimGreg, on 20 November 2009 - 08:41 PM, said:

Hey B here is the post on NOAS:

BL and ARB BMXCARD

All the good pics are on page 2.

Before:
Posted Image

After:
Posted Image

Cut and flipped upper mounts, then added a 3" piece of flat stock to the lower part and then gusseted it all with extra metal tabs.


Ahh, exactly what was needed. Thanks GG!! :beer:
I'm pretty confident that this will happen next week.

B
0

#6042 User is offline   Precise1 Icon

  • "SAVE THAT BEER WOMAN"
  • PipPipPipPipPip
  • Group: Moderator
  • Posts: 18,394
  • Joined: 02-September 04
  • Location:Santa Rosa, Ca
  • Model:XE
  • Year:1995

Posted Yesterday, 09:15 PM

View PostRedPath88, on 20 November 2009 - 08:56 PM, said:

Well I think it was in that range, I may be a little off. But I expected it to be over 100 and was surprised... it's just that they are so awkward to move around, it makes them seem heavier.

Fair enough, but I withhold comment until I yank the winch this weekend... :D

View PostGrimGreg, on 20 November 2009 - 09:08 PM, said:

Yeah, but at least there is a big long bar at the top to grab. Like I said before, the Xterra/Frontier ones are much worse since they have the longer side "wings" that wrap back to the wheel opening.

Try moving around a solid axel (ie D44) by your self, those are a PITA to carry solo. They make an ARB bumper seem like a feather.

Yes, GG, I often carry around solid axles. Here is some beef jerky... :lol:

B
0

#6043 User is offline   Kingman Icon

  • God is great, beer is good...and people are crazy
  • PipPipPipPipPip
  • Group: Members
  • Posts: 5,219
  • Joined: 08-October 08
  • Location:Camas, Washington USA
  • Model:SE
  • Year:1988

Posted Today, 12:45 AM

Driving home just now I noticed my rear passenger side brake grinds when I hit the brakes. It only does it below 25mph and with pretty heavy braking, but it's metal on metal grinding. Guess I'll have the guys look at it at work tomorrow... :togo:
0

#6044 User is offline   KailEkonen Icon

  • NPORA Fulltime Resident
  • PipPipPipPip
  • Group: Members
  • Posts: 264
  • Joined: 19-May 09
  • Location:New Paltz,NY.
  • Model:SE
  • Year:1991

Posted Today, 05:22 AM

It's just one thing after another isn't it.
0

#6045 User is offline   adamzan Icon

  • Professional Student
  • PipPipPipPipPip
  • Group: Members
  • Posts: 8,854
  • Joined: 16-July 06
  • Location:Ottawa Ontario, Canada
  • Model:XE
  • Year:1995

Posted Today, 06:06 AM

View PostKingman, on 21 November 2009 - 03:45 AM, said:

Driving home just now I noticed my rear passenger side brake grinds when I hit the brakes. It only does it below 25mph and with pretty heavy braking, but it's metal on metal grinding. Guess I'll have the guys look at it at work tomorrow... :togo:

Or do it yourself. Brake pads are so easy on pathfinders.
0

#6046 User is offline   GrimGreg Icon

  • King Dark Lord
  • PipPipPipPipPip
  • Group: Members
  • Posts: 12,044
  • Joined: 26-November 04
  • Location:Ohio
  • Year:1993

Posted Today, 06:37 AM

View PostPrecise1, on 21 November 2009 - 12:15 AM, said:

Yes, GG, I often carry around solid axles. Here is some beef jerky... :lol:

B


Well, I don't carry axles or ARB bumpers around on a normal basis either, just pointing out that it really isn't that heavy. :tongue:
0

#6047 User is offline   GrimGreg Icon

  • King Dark Lord
  • PipPipPipPipPip
  • Group: Members
  • Posts: 12,044
  • Joined: 26-November 04
  • Location:Ohio
  • Year:1993

Posted Today, 06:50 AM

A few FYIs B, I used my 110v flux core welder to do that work, he rearended another truck on the trail the month after the install, the bumper bent but the welds were solid. He has also used the winch a good many times. Just want you to be reassured that it will still be strong and winch ready after mods.

Here is a pic of when he pulled the bumper back after the wreck, you can see it moved a good 6"-8" back.
Posted Image
0

#6048 User is offline   KailEkonen Icon

  • NPORA Fulltime Resident
  • PipPipPipPip
  • Group: Members
  • Posts: 264
  • Joined: 19-May 09
  • Location:New Paltz,NY.
  • Model:SE
  • Year:1991

Posted Today, 06:55 AM

That'll totally buff out.
0

#6049 User is offline   Pezzy Icon

  • Canadian R50 Girl
  • PipPipPipPipPip
  • Group: Admin
  • Posts: 21,520
  • Joined: 28-October 04
  • Location:Toronto, Ontario
  • Model:XE
  • Year:1999.5

Posted Today, 06:58 AM

School all day Saturday, SUCKS.

zzzzzz
0

#6050 User is offline   GrimGreg Icon

  • King Dark Lord
  • PipPipPipPipPip
  • Group: Members
  • Posts: 12,044
  • Joined: 26-November 04
  • Location:Ohio
  • Year:1993

Posted Today, 07:00 AM

View PostKailEkonen, on 21 November 2009 - 09:55 AM, said:

That'll totally buff out.

He was able to bend the body work out and make it look a little better, but it's still creased and he is still looking for a replacement fender last I heard.
0

#6051 User is offline   Pezzy Icon

  • Canadian R50 Girl
  • PipPipPipPipPip
  • Group: Admin
  • Posts: 21,520
  • Joined: 28-October 04
  • Location:Toronto, Ontario
  • Model:XE
  • Year:1999.5

Posted Today, 07:00 AM

Casey sent me this one, was a good laugh:

Quote

To All You Ranchers out there....

This is a letter from someone who farms, writes well and actually tried this:

I had this idea that I could rope a deer, put it in a stall, feed it up on corn for a couple of weeks, then kill it and feast on it. The first step in this adventure was getting a deer. I figured that, since they congregate at my cattle feeder and do not seem to have much fear of me when we are there (a bold one will sometimes come right up and sniff at the bags of feed while I am in the back of the truck not four feet away), it should not be difficult to rope one, get up to it and toss a bag over its head to calm it down then hog tie it and bring it home.

I filled the cattle feeder then hid down at the end with my rope. The cattle, having seen the roping thing before, stayed well back. They were not having any of it. After about twenty minutes, my deer showed up---three of them. I picked out a likely looking one, stepped out from the end of the feeder, and threw my rope. The deer just stood there and stared at me. I wrapped the rope around my waist and twisted the end so I would have a good hold.

The deer still just stood and stared at me, but you could tell it was mildly concerned about the whole rope situation. I took a step towards it, it took a step away. I put a little tension on the rope .., and then received an education. The first thing that I learned is that, while a deer may just stand there looking at you funny while you rope it, they are spurred to action when you start pulling on that rope.

That deer EXPLODED. The second thing I learned is that pound for pound, a deer is a LOT stronger than a cow or a colt. A cow or a colt in that weight range I could fight down with a rope and with some dignity. A deer-- no chance.

That thing ran and bucked and twisted and pulled. There was no controlling it and certainly no getting close to it. As it jerked me off my feet and started dragging me across the ground, it occurred to me that having a deer on a rope was not nearly as good an idea as I had originally imagined. The only upside is that they do not have as much stamina as many other animals.

A brief ten minutes later, it was tired and not nearly as quick to jerk me off my feet and drag me when I managed to get up. It took me a few minutes to realize this, since I was mostly blinded by the blood flowing out of the big gash in my head. At that point, I had lost my taste for corn-fed venison. I just wanted to get that devil creature off the end of that rope.

I figured if I just let it go with the rope hanging around its neck, it
would likely die slow and painfully somewhere. At the time, there was no love at all between me and that deer. At that moment, I hated the thing, and I would venture a guess that the feeling was mutual.

Despite the gash in my head and the several large knots where I had cleverly arrested the deer's momentum by bracing my head against various large rocks as it dragged me across the ground, I could still think clearly enough to recognize that there was a small chance that I shared some tiny amount of responsibility for the situation we were in. I didn't want the deer to have to suffer a slow death, so I managed to get it lined back up in between my
truck and the feeder - a little trap I had set before hand...kind of like a squeeze chute. I got it to back in there and I started moving up so I could get my rope back.

Did you know that deer bite?

They do! I never in a million years would have thought that a deer would bite somebody, so I was very surprised when .... I reached up there to grab that rope and the deer grabbed hold of my wrist. Now, when a deer bites you, it is not like being bit by a horse where they just bite you and then let go. A deer bites you and shakes its head--almost like a pit bull. They bite HARD and it hurts.

The proper thing to do when a deer bites you is probably to freeze and draw back slowly. I tried screaming and shaking instead. My method was ineffective.

It seems like the deer was biting and shaking for several minutes, but it was likely only several seconds. I, being smarter than a deer (though you may be questioning that claim by now), tricked it. While I kept it busy tearing the tendons out of my right arm, I reached up with my left hand and pulled that rope loose.

That was when I got my final lesson in deer behavior for the day.

Deer will strike at you with their front feet. They rear right up on their back feet and strike right about head and shoulder level, and their hooves are surprisingly sharp. I learned a long time ago that, when an animal --like a horse --strikes at you with their hooves and you can't get away easily, the best thing to do is try to make a loud noise and make an aggressive move towards the animal. This will usually cause them to back down a bit so you can escape.

This was not a horse. This was a deer, so obviously, such trickery would not work. In the course of a millisecond, I devised a different strategy. I screamed like a woman and tried to turn and run. The reason I had always been told NOT to try to turn and run from a horse that paws at you is that there is a good chance that it will hit you in the back of the head. Deer may not be so different from horses after all, besides being twice as strong and three times as evil, because the second I turned to run, it hit me right in the back of the head and knocked me down.

Now, when a deer paws at you and knocks you down, it does not immediately leave. I suspect it does not recognize that the danger has passed. What they do instead is paw your back and jump up and down on you while you are laying there crying like a little girl and covering your head.

I finally managed to crawl under the truck and the deer went away. So now I know why when people go deer hunting they bring a rifle with a scope to sort of even the odds.

All these events are true so help me God. An Educated Rancher!!!

0

  • (303 Pages)
  • +
  • « First
  • 301
  • 302
  • 303
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users